koobcamuk
Apr 9, 12:04 AM
These people are fleeing the "yellow light of death� on PS3 or "red ring of death' on 360.
That's a complete joke, surely? There's no way you can compare console gaming, in basically a home arcade, to swiping your fingers around on a 3.5" screen. No way. I am a gamer, and always will be.
Gaming on the iPhone is good for 2-minute bursts, such as when sitting on the toilet. It's not a great games device. Most of the games are cheap with no replay value.
That's a complete joke, surely? There's no way you can compare console gaming, in basically a home arcade, to swiping your fingers around on a 3.5" screen. No way. I am a gamer, and always will be.
Gaming on the iPhone is good for 2-minute bursts, such as when sitting on the toilet. It's not a great games device. Most of the games are cheap with no replay value.
beret9987
Nov 12, 03:09 PM
Add me to the unhappy list. Granted me I'm in California, a place where AT&T data services are notorious for not working that well. I'm currently on Sprint and quite happy. Shame the iPhone is only limited to one network in the US though.
lifeinhd
Apr 8, 11:18 PM
Wirelessly posted (Mozilla/5.0 (iPod; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)
Not really impressed by the whole push into gaming-- gaming is what I use my iPT and iPad for the least. In fact, Game Center is in a folder marked "Undeletable Crap" on both devices, along with address book, FaceTime, calendar, and stocks (on the iPT). Really wish Apple allowed you to delete whatever you wanted-- but of course they know what I want better than I do.
Not really impressed by the whole push into gaming-- gaming is what I use my iPT and iPad for the least. In fact, Game Center is in a folder marked "Undeletable Crap" on both devices, along with address book, FaceTime, calendar, and stocks (on the iPT). Really wish Apple allowed you to delete whatever you wanted-- but of course they know what I want better than I do.
mike31mets
Apr 22, 06:34 PM
I was in the same boat as the OP a few years back. My circumstances and motivations in learning OS X were a bit than the OP's. I've learned a good deal about OS X. The things it can and can't do and how it differs from Windows.
So some of the stuff in this thread I knew about, but the one that I still can't figure out is switching between all windows. Everyone says just use CMD + ~. However when I do that on my iMac, all I get is a switch between windows in a particular application. I'm using the Apple standard wired keyboard with numberpad.
In Windows, ATL + Tab switches between all windows (and it shows you the windows in a preview much like CMD + Tab does with applications).
So some of the stuff in this thread I knew about, but the one that I still can't figure out is switching between all windows. Everyone says just use CMD + ~. However when I do that on my iMac, all I get is a switch between windows in a particular application. I'm using the Apple standard wired keyboard with numberpad.
In Windows, ATL + Tab switches between all windows (and it shows you the windows in a preview much like CMD + Tab does with applications).
G4er?
Apr 28, 08:56 AM
Apple might have held onto 3rd place if it had a mid range desktop computer positioned between the mini and the Pro.
I know I would have bought a new Mac instead of not buying anything.
I know I would have bought a new Mac instead of not buying anything.
TallGuy1970
Apr 20, 05:47 PM
If you don't know what you're doing with your own devices then maybe you need Apple to hold your hand.
Ah yes, the ever present "Android users must be smarter because they can customize their phones more" argument. It's still as irritating and off-base as it always was. :rolleyes:
Ah yes, the ever present "Android users must be smarter because they can customize their phones more" argument. It's still as irritating and off-base as it always was. :rolleyes:
bradl
Mar 18, 02:01 AM
Wow... was multi-tasking supported that early, or did we not get that until 4.0. It's early here in Florida and I can't remember.
But hey, if its working for you... go with it!
No. it wasn't.
I rarely use it, and when I do, it is work related. I went the MyWi route after the BenM hole was patched up in iOS > 3.1.
BL.
But hey, if its working for you... go with it!
No. it wasn't.
I rarely use it, and when I do, it is work related. I went the MyWi route after the BenM hole was patched up in iOS > 3.1.
BL.
Liquorpuki
Mar 14, 06:37 PM
The problem with this is that I don't see any huge breakthroughs in battery technology on the horizon, and the most efficient 'battery" is still water behind a dam - or the energy contained in non-renewable sources.
If that's the case, then it's coal or nuclear or combined cycle NG. (http://www.greenbang.com/energy-storage-critical-to-future-grid_16067.html) Which means coal or nuclear because combined cycle NG is too expensive to run 24/7.
But I really hope battery tech will improve over the next couple decades. From a design standpoint there really no other practical alternative. We can't build dams or pumped hydro stations or compressed air shafts everywhere. This article (http://www.pnl.gov/news/release.aspx?id=849) shows where we're at right now, technology wise.
If that's the case, then it's coal or nuclear or combined cycle NG. (http://www.greenbang.com/energy-storage-critical-to-future-grid_16067.html) Which means coal or nuclear because combined cycle NG is too expensive to run 24/7.
But I really hope battery tech will improve over the next couple decades. From a design standpoint there really no other practical alternative. We can't build dams or pumped hydro stations or compressed air shafts everywhere. This article (http://www.pnl.gov/news/release.aspx?id=849) shows where we're at right now, technology wise.
takao
Mar 13, 10:19 AM
Well, this is still playing out.
a japanese meterology institute estimates the chances of 7.0+ earthquake within the next 3 days at 70% so we will see how well they hold up
(even in europe some nuclear power plants are build rather close to minor seismic fault lines: for example in switzerland and germany)
a japanese meterology institute estimates the chances of 7.0+ earthquake within the next 3 days at 70% so we will see how well they hold up
(even in europe some nuclear power plants are build rather close to minor seismic fault lines: for example in switzerland and germany)
CoryTV
Apr 12, 10:43 PM
I think you missed the color correction on ingest, non-destructive color correction, and one-click color correction feature announcements. Color is not dead, it is just no longer a separate app. .
Have you ever even used color? I mean really USED IT? This is not what the program is for. It's not about "fixing your shots" it's about GRADING. This is a souped up version of the existing color correction, along with an autocorrect feature like Avid has had for quite a while (though probably better than that, I'm sure)
Color lets you make absurdly complex adjustments to a scene like a hollywood colorist-- in realtime-- 16 effective secondaries.. This has nothing like that.
Color was a $25,000 app that Apple bought, smacked their logo on it and gave it away essentially for free. Which was great at the time, but the hope was that they'd take that technology and integrate it. What they (and you described) is nothing like what Color does.
Have you ever even used color? I mean really USED IT? This is not what the program is for. It's not about "fixing your shots" it's about GRADING. This is a souped up version of the existing color correction, along with an autocorrect feature like Avid has had for quite a while (though probably better than that, I'm sure)
Color lets you make absurdly complex adjustments to a scene like a hollywood colorist-- in realtime-- 16 effective secondaries.. This has nothing like that.
Color was a $25,000 app that Apple bought, smacked their logo on it and gave it away essentially for free. Which was great at the time, but the hope was that they'd take that technology and integrate it. What they (and you described) is nothing like what Color does.
iJohnHenry
Mar 13, 05:29 PM
Bah humans in general are eejits.
Some, but otherwise I cannot fault your abuse of English. ;)
Except for you and me ...... and I'm not totally sure about you. :p
Some, but otherwise I cannot fault your abuse of English. ;)
Except for you and me ...... and I'm not totally sure about you. :p
dontwalkhand
Apr 9, 12:49 AM
Why doesnt Apple allow you to plug a controller in the 30 pin adaptor? Wouldnt that be the best of both worlds?
Because they do not want games that only work if you buy the controller.
Because they do not want games that only work if you buy the controller.
jav6454
Mar 13, 05:01 PM
Nuclear Power? I already have one such plant and reactor in my backyard....
NebulaClash
Apr 28, 03:09 PM
OK, so you want a completely independent tablet that does not communicate with anyone or anything unless you want it to but can still be useful as is. I don't think you are going to enjoy the next decade. That world is being pushed aside by the connected future. So while you will be able to get the tablet you want, it won't be the tablet most people will want.
You think me young for thinking most PCs are mostly useless without Net connectivity. Fine, make your assumptions. What I was talking about is the business cloud present and future where PCs are becoming front end devices to cloud databases.
As for personal use, most people don't even notice the hardware today any more than most people can tell you the ignition timing specs of their car. They just want to use their apps (drive their car). I think this is a healthy development because the computer should fade into the background for the next level of progress to be made. Don't worry, techies and hackers, you'll always have your devices to take apart (just as anyone can hack a car's engine if they wish). But the vast majority of computer users just want a device that gives them their apps. A new world awaits them, and they are going to love it.
You think me young for thinking most PCs are mostly useless without Net connectivity. Fine, make your assumptions. What I was talking about is the business cloud present and future where PCs are becoming front end devices to cloud databases.
As for personal use, most people don't even notice the hardware today any more than most people can tell you the ignition timing specs of their car. They just want to use their apps (drive their car). I think this is a healthy development because the computer should fade into the background for the next level of progress to be made. Don't worry, techies and hackers, you'll always have your devices to take apart (just as anyone can hack a car's engine if they wish). But the vast majority of computer users just want a device that gives them their apps. A new world awaits them, and they are going to love it.
Evangelion
Jul 13, 08:08 AM
Actually, it looks the same from both perspectives.
Nope, it doesn't. Besides, I already told you in another thread that Intel agrees with my intrepetation on this matter. The see dual-dual systems as 2-way systems, whereas according to you, they are 4-way systems. Are you saying that Intel does not know what they are doing?
Nope, it doesn't. Besides, I already told you in another thread that Intel agrees with my intrepetation on this matter. The see dual-dual systems as 2-way systems, whereas according to you, they are 4-way systems. Are you saying that Intel does not know what they are doing?
AppliedVisual
Oct 14, 02:55 AM
I am so glad you tried and succeeded in getting that discount. That's great. Hope you didn't suffer too much brain damage ripping on that sales rep. Wish I could have heard that. lol. :p
Actually, I just played it pretty cool. I just told him that I overlooked the coupon and asked if they could apply it, since it would save me about $100. He started with the "I'm sorry, sir. But we can't apply coupons to prior purchases..." So I just went into the "OK, no problem then, I would like to cancel my current order and refuse shipment on it" Which they allow in their return policy. "...And I would like to place a new order for the 30" using this coupon." He kinda paused and made some sort of groaning noise and instinctually started to tell me I couldn't do that. But then he put me on hold for about two minutes, came back and agreed to apply the coupon. I think I realized that he couldn't stop me from doing the cancel and re-order routine and it was a waste of time for both of us and didn't help them out any. He probably needed a manager approval to apply the coupon or something.
Want to have a contest to see who can have their 8-Core Mac Pro delivered first? I will have to drive to Santa Clara 35 miles to buy an Apple gift card so I can complete my online purchase so you might be able to beat me.
Like I posted in the other thread, sure. :) I don't know how it will play out on this end either. I'm ready to buy today, but I'm also starting a fairly large project in about 2 weeks or so. Depending on that and budget restrictions I may buy once the 8-core systems arrive or I may wait. ...Not that I want to wait.
Please share with us what config you will buy and why. I plan on buying only the 1GB model and buying my RAM from Omni Optival - only 2 more GB. So far it looks like my multi-threaded apps do not use much ram at all while using up to 4 cores EACH. So they're RAM stingy and Core HOGS. I am not getting this for Photoshop but for compressing video in 2 to 4 simultaneous applications.
My 3D rendering is all over the place in terms of RAM requirements. However it tends to top out at about 2 to 4 GB for the most demanding scenes. Primarily I use Lightwave3D and a companion render plug-in called FPrime to do most of my rendering. FPrime is still limited to dual-threads or two cores under practicality and also is still a 32bit app. But on my quad-cores I run three instances of it at once and it seems to work out well. Two instances of it doesn't use all my RAM and seems to leave a CPU or two idle about 30% of the time. Hmmmm... As for Lightwave, it's also still a 32bit app with 32bit render node software that is very poorly multithreaded with most plug-ins for the renderer being single-threaded. So I tend to set up dedicated render nodes for each CPU core and dedicate 1GB to each. Works fairly well... I haven't found a real solid way to actually set CPU affinity for individual applications in OSX or at least not automatically when loading up the apps. I wrote a small utility on the PC that works in every version of Windows from NT4 up to Vista that assigns any combination of affinity to an app when launching it. I let people download it for free starting a couple years ago... Dumb move, it's been downloaded over 100,000 times. Should've charged $1.00 per download seeing how i write the thing in 10 minutes and it has a bug in the command line parser that I've never fixed.
Anyway, to answer the question, I'm planning to buy the 2.66GHz model - possibly the 2.33GHz depending on the price difference. If it looks like what you have figured, then I think the 2.66GHz will be worth it for me. I will buy the base RAM configuration and replace it with aftermarket RAM from whoever looks to have the best price/quality on their modules when the time comes. I'll get the x1900xt video card unless they offer something better in about the same price range. Bluetooth module, fiber channel card and I will upgrade the included HDD to the 500GB model. I'll probably pick up a second 500GB on my own and set the two up in a RAID-0 stripe to install the system on. It will connect to my Dell 30" (soon to be dual 30" hahaha) displays via the Gefen switchers. That way I can still switch between my Quad and my other PC and my MBP if I want to plug it in.
Oh, I'm planning on putting the included RAM on ebay since it will run at slower speed most likely. The 512MB FB-DIMMs don't run at the full bandwidth due to how the buffering works only 1GB and 2GB modules do. I plan to install 8GB RAM via 4x2GB modules.
Actually, I just played it pretty cool. I just told him that I overlooked the coupon and asked if they could apply it, since it would save me about $100. He started with the "I'm sorry, sir. But we can't apply coupons to prior purchases..." So I just went into the "OK, no problem then, I would like to cancel my current order and refuse shipment on it" Which they allow in their return policy. "...And I would like to place a new order for the 30" using this coupon." He kinda paused and made some sort of groaning noise and instinctually started to tell me I couldn't do that. But then he put me on hold for about two minutes, came back and agreed to apply the coupon. I think I realized that he couldn't stop me from doing the cancel and re-order routine and it was a waste of time for both of us and didn't help them out any. He probably needed a manager approval to apply the coupon or something.
Want to have a contest to see who can have their 8-Core Mac Pro delivered first? I will have to drive to Santa Clara 35 miles to buy an Apple gift card so I can complete my online purchase so you might be able to beat me.
Like I posted in the other thread, sure. :) I don't know how it will play out on this end either. I'm ready to buy today, but I'm also starting a fairly large project in about 2 weeks or so. Depending on that and budget restrictions I may buy once the 8-core systems arrive or I may wait. ...Not that I want to wait.
Please share with us what config you will buy and why. I plan on buying only the 1GB model and buying my RAM from Omni Optival - only 2 more GB. So far it looks like my multi-threaded apps do not use much ram at all while using up to 4 cores EACH. So they're RAM stingy and Core HOGS. I am not getting this for Photoshop but for compressing video in 2 to 4 simultaneous applications.
My 3D rendering is all over the place in terms of RAM requirements. However it tends to top out at about 2 to 4 GB for the most demanding scenes. Primarily I use Lightwave3D and a companion render plug-in called FPrime to do most of my rendering. FPrime is still limited to dual-threads or two cores under practicality and also is still a 32bit app. But on my quad-cores I run three instances of it at once and it seems to work out well. Two instances of it doesn't use all my RAM and seems to leave a CPU or two idle about 30% of the time. Hmmmm... As for Lightwave, it's also still a 32bit app with 32bit render node software that is very poorly multithreaded with most plug-ins for the renderer being single-threaded. So I tend to set up dedicated render nodes for each CPU core and dedicate 1GB to each. Works fairly well... I haven't found a real solid way to actually set CPU affinity for individual applications in OSX or at least not automatically when loading up the apps. I wrote a small utility on the PC that works in every version of Windows from NT4 up to Vista that assigns any combination of affinity to an app when launching it. I let people download it for free starting a couple years ago... Dumb move, it's been downloaded over 100,000 times. Should've charged $1.00 per download seeing how i write the thing in 10 minutes and it has a bug in the command line parser that I've never fixed.
Anyway, to answer the question, I'm planning to buy the 2.66GHz model - possibly the 2.33GHz depending on the price difference. If it looks like what you have figured, then I think the 2.66GHz will be worth it for me. I will buy the base RAM configuration and replace it with aftermarket RAM from whoever looks to have the best price/quality on their modules when the time comes. I'll get the x1900xt video card unless they offer something better in about the same price range. Bluetooth module, fiber channel card and I will upgrade the included HDD to the 500GB model. I'll probably pick up a second 500GB on my own and set the two up in a RAID-0 stripe to install the system on. It will connect to my Dell 30" (soon to be dual 30" hahaha) displays via the Gefen switchers. That way I can still switch between my Quad and my other PC and my MBP if I want to plug it in.
Oh, I'm planning on putting the included RAM on ebay since it will run at slower speed most likely. The 512MB FB-DIMMs don't run at the full bandwidth due to how the buffering works only 1GB and 2GB modules do. I plan to install 8GB RAM via 4x2GB modules.
mangrove
Sep 2, 10:52 AM
:D:D:D
The happiest day of my life finally arrived-I switched to Verizon 2 days ago.
The happiest day of my life finally arrived-I switched to Verizon 2 days ago.
�algiris
May 2, 09:28 AM
You're awfully sensitive about this issue, chief.
When things a blown out of proportions.
When things a blown out of proportions.
jefhatfield
Oct 11, 09:12 AM
when i got my ibook, which was manufactured in summer-1999 and listed for $1599 us, i got a 300 mhz G3 processor, 32 MB of 66 mhz sdram, 3 GB hard drive, 4 MB agp graphics, and os 9.0
the next day i bought a compaq presario 1272 laptop, manufactured in spring-1999, $1599 us, and i got a 366 mhz amd k6-2 processor, 32 MB of 66 mhz sdram, 4.3 GB hard drive, 2 MB pci graphics, and windows 98
i would clearly say that these two machines were marketed for students and home users who were then looking for a bargain computer under sixteen hundred dollars
while the higher clock speed compaq presario had a larger hard drive, more output ports, more software bundled, pcmcia, and floppy against the single usb ibook;
i found the ibook to be much faster in everyday use for e-mail, internet, and word processing
it would be fun to get an $1199 ibook and get an $1199 dell laptop and use these machines every day for three years and see what kind of performance i get from them
...of course, at $1199, the pc laptop would give me a dvd optical drive vs. the cd-rom in the ibook, and a 14" inch screen vs. the ibook's 12" inch screen, and the pc would include much more software:p
the next day i bought a compaq presario 1272 laptop, manufactured in spring-1999, $1599 us, and i got a 366 mhz amd k6-2 processor, 32 MB of 66 mhz sdram, 4.3 GB hard drive, 2 MB pci graphics, and windows 98
i would clearly say that these two machines were marketed for students and home users who were then looking for a bargain computer under sixteen hundred dollars
while the higher clock speed compaq presario had a larger hard drive, more output ports, more software bundled, pcmcia, and floppy against the single usb ibook;
i found the ibook to be much faster in everyday use for e-mail, internet, and word processing
it would be fun to get an $1199 ibook and get an $1199 dell laptop and use these machines every day for three years and see what kind of performance i get from them
...of course, at $1199, the pc laptop would give me a dvd optical drive vs. the cd-rom in the ibook, and a 14" inch screen vs. the ibook's 12" inch screen, and the pc would include much more software:p
Jcoz
Mar 18, 11:55 AM
I hate how these carriers work in the US.
If you give us a data allowance, that is what you give us - regardless of how we use it.
If you were giving us unlimited data, then I could understand why you would be charging for tethering. But that would go bad anyways.
I agree.
I completely understand the idea that unlimited data should have to pay for tethering, although I think there should just be a cap prior to additional charges like verizon does.
What I dont understand is how they think charging tiered data customers for tethering is fair.
If you give us a data allowance, that is what you give us - regardless of how we use it.
If you were giving us unlimited data, then I could understand why you would be charging for tethering. But that would go bad anyways.
I agree.
I completely understand the idea that unlimited data should have to pay for tethering, although I think there should just be a cap prior to additional charges like verizon does.
What I dont understand is how they think charging tiered data customers for tethering is fair.
Moyank24
Mar 18, 01:43 AM
Option 3; STOP trying to cheat the system, and START using your iDevice the way the manufacturer and your carrier designed it.
And while you're at it, knock off the piracy with the napster/limewire/torrent crap.
(Yeah, I said it! SOMEBODY had to!)
Do napster and limewire even exist anymore?
And while you're at it, knock off the piracy with the napster/limewire/torrent crap.
(Yeah, I said it! SOMEBODY had to!)
Do napster and limewire even exist anymore?
dethmaShine
Apr 20, 05:42 PM
Exactly. Android doesn't have the IBM that give them the PC market.
Verizon was Android's IBM but now iPhone is now on vz.
So you are insulting all Apple users as those who "don't know what you're doing with your own devices."
Perhaps you didn't realize MILLIONS of Android users downloaded malware.
I have used an HTC desire. Threw it away; got a Nexus S. Bloody awesome one. But I couldn't use it for much. But...
The application quality literally sucks on android. It's pathetic. Way too reboots and unstable phone. Android is LAGGY on the nexus S. The experience is poor.
I now have a trophy 7 and I love it. :)
Some OR most of the fans are abusive and are too much into google. Don't realize its an iOS ripoff and a fragmented experience. Nuff said.
Verizon was Android's IBM but now iPhone is now on vz.
So you are insulting all Apple users as those who "don't know what you're doing with your own devices."
Perhaps you didn't realize MILLIONS of Android users downloaded malware.
I have used an HTC desire. Threw it away; got a Nexus S. Bloody awesome one. But I couldn't use it for much. But...
The application quality literally sucks on android. It's pathetic. Way too reboots and unstable phone. Android is LAGGY on the nexus S. The experience is poor.
I now have a trophy 7 and I love it. :)
Some OR most of the fans are abusive and are too much into google. Don't realize its an iOS ripoff and a fragmented experience. Nuff said.
Eidorian
Jul 13, 07:17 AM
Like I said, my laptop has a hotter CPU in it. I've yet to hear a good argument as to why a Conroe is too hot to put in an iMac when they had G5's in them not so long ago. If a Macbook can handle 35W then the much much bigger and thicker iMac can handle 65W.
The below lists power consumed by the part, they are not TDP numbers (only part of the power consumed by a chip leaves the chip as heat, heat is what you have to dissipate and is what TDP attempts define).
PPC 970fx power optimized part (@ 2GHz)
40W average, 45-50 W max, 23 W throttle back (half frequency)
PPC 970fx standard part (@ 2GHz)
48W average, 55-60 W max, 29 W throttle back (half frequency)
To me this puts the PPC 970fx below the TDP of a Conroe... I would say the TDP for the PPC 970fx (@2Ghz) is around 40 W (if not lower).Conroe might be possible for the iMac. But why redesign the motherboard when you can just DROP IN Merom where Yonah once was?
The below lists power consumed by the part, they are not TDP numbers (only part of the power consumed by a chip leaves the chip as heat, heat is what you have to dissipate and is what TDP attempts define).
PPC 970fx power optimized part (@ 2GHz)
40W average, 45-50 W max, 23 W throttle back (half frequency)
PPC 970fx standard part (@ 2GHz)
48W average, 55-60 W max, 29 W throttle back (half frequency)
To me this puts the PPC 970fx below the TDP of a Conroe... I would say the TDP for the PPC 970fx (@2Ghz) is around 40 W (if not lower).Conroe might be possible for the iMac. But why redesign the motherboard when you can just DROP IN Merom where Yonah once was?
Aduntu
Apr 15, 01:06 PM
The problem is, and maybe I misread, that it only counts as "rape" if the woman fights back. All rapes are different, just as all women are, a rape victim I know personally, went into a catatonic state during the sexual assault. So, by that definition, she was "consenting" and should be stoned as well. In some cases, the assailant will threaten death of the victim/victim's family to ensure submission. So do these count as rape, since they're not fighting back?
I wanted to make it clear that a person would need to be in a state of awareness that allowed them to resist. This may not always be the case. Like your example, some people may not be in a state that they are able to resist. The point of those examples in the bible were not to define rape or the final verdicts for cases of rape. They weren't written to judge whether a person was truly raped or not. Every situation is different, and it's in no way implying that a person hasn't been raped because they didn't demonstrate that they were resisting.
The point of my original response to another commenter was to clarify that the bible doesn't simply instruct people to stone a women to death because she was raped.
I wanted to make it clear that a person would need to be in a state of awareness that allowed them to resist. This may not always be the case. Like your example, some people may not be in a state that they are able to resist. The point of those examples in the bible were not to define rape or the final verdicts for cases of rape. They weren't written to judge whether a person was truly raped or not. Every situation is different, and it's in no way implying that a person hasn't been raped because they didn't demonstrate that they were resisting.
The point of my original response to another commenter was to clarify that the bible doesn't simply instruct people to stone a women to death because she was raped.
